+1-888-214-6090

English
Try before you buy with an online demo and using your samples
Configure your Glossmeter
View our product video library

Gloss, Haze, DOI & Opacity FAQs

FAQ Categories

Why buy an IQ, not a Glossmeter? (10)

  1. Additional information on the Rhopoint IQ
  2. Sample Flatness Compensation and Measuring Reflected Image Quality (RIQ) with the Rhopoint IQ
  3. Why use RIQ instead of DOI?
  4. Rhopoint glossmeter comparison table
  5. What is orange peel and DOI and how is it measured?
  6. What is haze and how is it measured?
  7. What is gloss and how is it measured?
  8. Why is it not enough to measure only gloss?
  9. Why buy a Rhopoint IQ, not a gloss meter?
  10. What is RSpec?

Rhopoint IQ & Novo-Gloss (15)

  1. Buttons are not responding or pressing themselves
  2. My instrument shuts down after taking a measurement
  3. My instrument is stuck in a measurement loop
  4. My instrument is displaying an error
  5. My instrument always reads the same
  6. My instrument readings vary too much
  7. I get an error message when I calibrate my instrument
  8. My instrument won’t switch on
  9. Do I need to send my instrument and tile for calibration or just tile?
  10. How do I know when my calibration tile needs replacing?

Novo-Gloss & Rhopoint IQ Troubleshooting (15)

  1. Buttons are not responding or pressing themselves
  2. My instrument shuts down after taking a measurement
  3. My instrument is stuck in a measurement loop
  4. My instrument is displaying an error
  5. My instrument always reads the same
  6. My instrument readings vary too much
  7. I get an error message when I calibrate my instrument
  8. My instrument won’t switch on
  9. Do I need to send my instrument and tile for calibration or just tile?
  10. How do I know when my calibration tile needs replacing?

Rhopoint IQ Flex Measurement Advice (8)

  1. Why should I use a custom adaptor?
  2. When do I use the curved part adaptor?
  3. Should I use the measuring head connected directly to the instrument?
  4. ISO2813 recommends surfaces measuring mid to low gloss finishes using 60 and 85 deg. Is the flex 20 suitable for measuring these surfaces?
  5. When should I use a custom adaptor?
  6. How can I overcome errors in reading due to operator poor positioning?
  7. How do I calibrate my instrument when using a custom adaptor?
  8. How often should I recalibrate the IQ Flex?

RSpec (1)

  1. What is RSpec?

Related products

Rhopoint AIDO

Novo-Gloss Flex 60-X Glossmeter

Intermediate Gloss Calibration Tiles

Medium Gloss Calibration Tiles (ISO 17025)

Medium Gloss Calibration Tiles (100x100mm)

Low Gloss Calibration Tiles (ISO 17025)

GLOSS, HAZE, DOI & Opacity
Transparency Measurement
LIQUID COATING testing
PACKAGING TEST INSTRUMENTS
SURFACE & Appearance ANALYSIS
Gloss, Haze, DOI & Opacity
Glossmeter Configurator
Contact Us
Back to top

FAQ Category: Gloss, Haze, DOI & Opacity

Glossmeter Configurator
Contact Us
Back to top
Rhopoint Americas
Powered by  GDPR Cookie Compliance (opens in a new tab)
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.