Appearance & Measurement Experts since 1986

+1-888-214-6090

Table of Contents

Related FAQs
FAQ Categories

My instrument won’t switch on

The first thing to check is the battery. Connect the instrument to a power source via the USB cable. A computer, or the supplied mains>USB converter will both work. Leave the instrument for 30s, and then try to power up again.

If the instrument beeps but the screen does not turn on, this indicates that there is an issue with the screen. This will require repair at a Rhopoint accredited service centre.

If the LED lights at the base of the instrument turn on when the power button is held, then the instrument is in programming mode. This will require repair at an accredited service centre.

Related products

Flow cup afnor

AFNOR Viscosity Flow Cup

  • 2mm - 8mm orifice diameter
  • 15 – 3000 cSt viscosity range
  • 25 -150 sec flow times
  • Supplied with a certificate of conformity
  • Sheen 419/2.5, 419/4, 419/6 & 419/8 equivalent

Flow cup astm iso

ASTM D1200 Viscosity Flow Cup

  • 2.1mm - 5.8mm orifice diameter
  • 10 – 1200 cSt viscosity range
  • 30-100 sec flow times
  • Supplied with a certificate of conformity
  • Sheen 406/1, 406/2, 406/3, 406/4 & 406/5 equivalent

Flow cup bs3900

BS3900 (1971) Viscosity Flow Cup

  • 2.38mm - 7.14mm orifice diameter
  • 38 – 1650 cSt viscosity range
  • Flow times 300-300 sec
  • Supplied with a certificate of conformity
  • Sheen 401/2, 401/3, 401/4, 401/5 & 401/6 equivalent