MFFT 90 Minimum Film Forming Temperature Instrument
- Measures the minimum film forming temperature of water based coatings
- Determines the MFFT of latex, emulsions and adhesives
- -10°C to 90°C operation
Paints & Coatings
Rhopoint IQ 20/60/85 Gloss Haze DOI Meter
- 20/60/85° gloss meter for matt to mirror finishes
- Haze and DOI measurement to ASTM E430
- To ensure accurate and reliable results, the Rhopoint IQ 20/60/85 Gloss Haze DOI Meter is supplied with standards calibrated and certified according to ISO 17025 UKAS
- Why should I buy an IQ and not a standard glossmeter?
Rhopoint IQ 20/60 Gloss Haze DOI Meter
- 20/60 gloss meter for matt to mirror finishes
- Haze and DOI measurement to ASTM E430
- To ensure accurate and reliable results, the Rhopoint IQ 20/60 Gloss Haze DOI Meter is supplied with standards calibrated and certified according to ISO 17025 UKAS
- Why should I buy an IQ and not a standard gloss meter?
Novo-Gloss Trio 20/60/85 Glossmeter
- 20/60/85° low cost glossmeter for all gloss applications
- Rapid data transfer
- To ensure accurate and reliable results, the Novo-Gloss Trio 20/60/85 Glossmeter is supplied with standards calibrated and certified according to ISO 17025 UKAS
- Does the surface to be measured have texturing?
Novo-Gloss 60 Glossmeter
- 60° glossmeter for all gloss applications
- Full colour easy to read screen
- To ensure accurate and reliable results, the Novo-Gloss 60 Glossmeter is supplied with standards calibrated and certified according to ISO 17025 UKAS
- Pass / Fail for easy identification of non-conformances
Novo-Shade Duo + Shade, Opacity & Cleanliness Meter
- Measure opacity (hiding power)
- Measures shade on grayscale
- Suitable for measuring coatings or plastic films
- Why buy a Novo-Shade Duo+ and not a spectrophotometer
Novo-Curve 4 Glossmeter
- Benchtop glossmeter, Measures at 60°
- Suitable for both curved & flat surfaces
- Precise measurement of small areas & irregular shapes
- Custom adaptor jigs available
- To ensure accurate and reliable results, the Novo-Curve 4 Glossmeter is supplied with standards calibrated and certified according to ISO 17025 UKAS
Optimap PSD
- Map and measure surface finish with the the Optimap3-PSD
- Characterization of common surface irregularities including defects, waviness and roughness
- Suitable for all finishes, from matt to mirror
- On-screen image analysis
